We are pleased to announce that we are going to exhibit in both exhibitions“the 21st INTERPHEX JAPAN” and “the 1st Regenerative Medicine Expo. Tokyo”We are welcoming you to visit both our booths.

This year the tittle is, “AIREX technologies aimed for both rapid and continuous solutions will have a revolutionary impact for the pharmaceutical market and regenerative medicines manufacturing processes.” We would like to invite you into the world of state of the art clean technologies.

Because of the tendency such as PIC/S-GMP Annex 1 revision and/or trends for mass production of regenerative medicines or tissue engineering products demands, new GMP is asking more strict requirements such as “Sterility”, “Containment”, “Sterility + Containment” and “Sterilization/Decontamination”, including all these related technologies of environment monitoring as well as validations to comply with those requirements. Under these circumstances “Rapid” or “Continuous” are the important keywords. Therefore Airex would like to invite you so that we can explain and demonstrate our advanced and current technologies.

● Exhibits:
　① ”UD PB (UD Continuous tabs decontamination system)“：TABs (for Syringe, Vials) Continuous decontamination system
　② “BBCheck®” ：Instant determination of Bio positive and support sterility assurance of low F0 roducts.
　③ “EI(Enzyme indicator)”：Decontamination validation within a minute.
　④ “PFO Particle counter”：Real-time image particle fallout monitoring. First time in Japan.Provided by XCAM, England
　⑤ “Continuous Coating Models”：Tablet’s continuous coating machinery manufacturer.Provided by the O’HARA, Canada.
　⑥ Compact decontamination unit KUBE：BSL effluent continuous inactivation system.Provided by ACTINI, France.
　⑦ “Smart Glove Tester®”：Rapid wireless glove tester.
　⑧ “Full-turn Half-suit TM”：Half suit that can rotated 360 degrees, which improves operation angle
　⑨ Remote-controlled five-finger movable robot hand：Aiming at future gloveless operation.

● Seminar presentation information：
　Date：July 4 (THU) 13:40～14:40
　Place: West hall Tokyo big sight
　Presentation title:
　AIREX technologies aimed for both rapid and continuous solutions will have a revolutionary impact for the pharmaceutical market and regenerative medicines manufacturing processes

● Exhibiting hall：
　Date：July 3 (THU) ~ July 5 (FRI) 2019　10:00～18:00
　Place：Tokyo big sight West・South exhibition hall “West hall 2nd floor　W21-35”

>>>　Official site



■ 1st Regenerative Medicine Expo. Tokyo.
As an Air Management Expert, Airex have been supporting many projects to provide aseptic environments for pharmaceutical manufacturing facilities for more than 20 years, mainly using isolators including its decontamination equipment.
In recent years, increasing opportunities to support aseptic manufacturing in regenerative medicine manufacturers, Airex will participate the 1st Regenerative Medicine Expo. Tokyo and demonstrate our advanced technologies, which will be held in July this year.
In our booth titled "Decontamination, isolators, and aseptic engineering in regenerative medicine manufacturing. We would like to invite you into the world of state of the art clean technologies as well as QA for your challenges and requirements of each site.
We are looking forward seeing you at our booth.

● Exhibiting hall
　Date：July 3 (THU) ~ July 5 (FRI) 2019　10:00～18:00
　Place：Tokyo big sight　AOMI Hall 【 A2-12 Booth 】
　　　　　(1-2-33 Aomi, koutouku, Tokyo）

>>>　Official site